If your Leesburg, FL home uses a heat pump for heating and cooling purposes, it may seem like it is twice as likely that something can go wrong. These types of heating and cooling systems operate somewhat differently than a traditional HVAC unit.

Icing Up

During the winter, it’s not uncommon for your heat pump to get covered with frost or ice. And every so often, it’s designed to go into defrost mode to remove the frost. Unfortunately, if your unit becomes encased in ice, it may not function properly. Removing the ice before it causes permanent damage to the fan blades, fins or compressor is crucial.

Here’s What You Can Do

If you find the pump frozen, never try to chip away the ice from the fan coils. Instead, you can try to melt the ice with water from a hose or with warm tap water. If unsuccessful, you need to enlist the help of an HVAC professional.

Running Constantly

Florida summers are known for triple-digit temperatures, so your unit will have to work harder than it does in the fall. But if your heat pump never turns off, it could be struggling to reach the desired temperature. Before you call a technician, there are few things you can do to troubleshoot the problem.

Here’s What You Can Do

Make sure that your thermostat is set correctly and that it’s set for cooling. A simple switch of the button can rectify the issue.

Blowing Cold in Heat Mode

Check to make sure the power supply wasn’t accidentally switched to cooling mode. Following this, also inspect your outside unit and make sure it’s not iced over. If everything seems to be fine on inspection, there could be issues with the compressor or valves. You may also be low on refrigerant charge.

Still looking for the inside scoop on HVAC? Check our blog where you’ll find a variety of tips to keep HVAC systems running smoothly all year long.

Pin It on Pinterest